Monday, November 29th | 25 Kislev 5782

Subscribe
August 16, 2020 5:21 am
0

A Glimpse Into Israel’s Spy Satellite Program

avatar by Yaakov Lappin / JNS.org

Opinion

A new Israeli spy satellite, called Ofek 16, is shot into space from a site in central Israel July 6, 2020. Photo: Israel Ministry of Defense Spokesperson’s Office/Handout via REUTERS.

JNS.orgBefore the break of dawn on July 6, Israel upgraded its spy satellite capabilities by a considerable degree after successfully launching the Ofek 16 satellite into space from central Israel. The satellite is designed to boost Israel’s ability to monitor the dangerous activities of its adversaries throughout the Middle East, including Iran and Hezbollah.

Such launches would not be possible without the participation of the Manor Division of Rafael Advanced Defense Systems, which develops and produces space propulsion technology.

Shimshon (his full name has been withheld), an official at the Manor Division, provided a glimpse into the little-known world of cutting-edge Israeli space technology.

“We deal mainly with two technologies for space. One is space propulsion, and the second is composite space structures [for securely affixing the satellite’s cameras],” he said.

Related coverage

November 29, 2021 11:35 am

White Noise and the Haters of Israel

The late atheist writer Christopher Hitchens used to refer to the theological arguments of his critics as “white noise.” As...

Propulsion in space must be extremely reliable, as any error could cause a catastrophic mission failure and see fortunes wasted, including the money spent on the launch. The responsibility to get every last detail right rests on the shoulders of Manor Division personnel.

“In terms of propulsion, we support the Israeli satellite program. We support the Israel Aerospace Industries [the prime contractor for the Ofek satellite series, and producers of the Shavit launch vehicle]. We are the secondary contractors of IAI,” said Shimshon.

The Manor Division creates two kinds of propulsion systems for the satellite. The first kicks into action during the third stage of the launch into space, helping to accurately guide the satellite to its orbit. The second is the satellite’s own independent propulsion system, which helps keep it in orbit and enables controllers on the ground to order the satellite to change orbit, if this becomes necessary.

The first type of propulsion is active for around 15 minutes. The second type can extend for up to 15 years — or the length of the satellite’s life span, said Shimshon.

“The third stage of the launch engine functions when it’s in space. This stage is made by Rafael. It was developed here, and the technology is highly advanced. When operating an engine in space, the weight is very important. The less the engine weighs, the more satellite you can bring up. The goal is to make more weight available for the satellite,” he explained.

This involves the use of light metals that act as a container for the solid fuel used in this stage of the launch. The fuel used for this type of propulsion is called hydrazine, a liquid that creates many safety challenges.

“We have the means to function with this material. And its great advantage is that can easily break apart with a catalyst and create a jet stream; this creates the momentum,” he added.

“We have a lab that is a simulations center. There, we check every engine to see if it passes our tests,” said Shimshon.

The simulator is only one of few such facilities that exist in the world that specialize in the use of hydrazine as a fuel in space. “This chemical propulsion system keeps the satellite maneuvering throughout its life. The valves open up for milliseconds, and this must happen millions of time during the mission. This is the technology we developed so that this satellite can conduct all of its missions over time,” he stated.

The concept is similar, at its most simple level, to a balloon emptying itself of air as it flies through a room. But applying this kind of propulsion technology in space is enormously complex. The satellite engines are not always on, but instead only activated when momentum is needed, like a change of orbits.

Bringing up the right amount of fuel is also critical. “Because orbits naturally change and have to be corrected over time, if you don’t have enough fuel, the satellite will burn up in the atmosphere,” said Shimshon. “We market many of these fuel tanks and engines to clients abroad.”

Meanwhile, the Manor Division’s composite structure holds the satellite’s camera in place, which feeds intelligence agencies with vital information on activities of interest on the ground.

“The material is very stable in the face of the extreme temperatures encountered in space,” said Shimshon. “If this did not happen, the structure [would become] distorted and that, in turn, can distort the images. The structure’s stability is what allows the camera to provide good resolution.”

During launches, company representatives arrive in specialized suits to conduct the fueling of the satellite and the launcher. This is a highly sensitive process, and the most minuscule glitch can destroy the entire satellite. “Our team gets its oxygen from another location as it conducts the fueling. It operates steps by step in line with the procedures and under the guidance of a controller,” explained Shimshon. “There are few companies in the world that can provide this service.”

Rafael’s Manor Division has exported engines and containers to customers worldwide; today, there are more than 77 satellites in space with the division’s products. We supply leading companies in this area in Europe. We are now working on our first export project, of a fuel container for a satellite, to the US,” added Shimshon.

Looking ahead, the company has been developing electric propulsion systems that are generated using the sun’s energy freely available in space. “The efficiency is five times higher than chemical propulsion,” he said.

Currently, a satellite jointly made by Israel and France, launched in 2017, is in space with a Rafael-made electric propulsion system, which photographs agricultural fields. “Now, we are working on the next generation of this — making the propulsion system more compact and efficient,” said Shimshon. “Here, too, we seek to export to the world.”

Yaakov Lappin is a writer and commentator, who writes for JNS among other outlets.

The opinions presented by Algemeiner bloggers are solely theirs and do not represent those of The Algemeiner, its publishers or editors. If you would like to share your views with a blog post on The Algemeiner, please be in touch through our Contact page.

Share this Story: Share On Facebook Share On Twitter

Let your voice be heard!

Join the Algemeiner

Algemeiner.com

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.